N a n o t e c

Bringing you the Innovation. Professional ICT and Security Distributor
Cart (empty)
Your cart is empty
MENU
  • All ProductsNew!
  • Deals & ServicesOffered!
  • Brands
  • About Us

HyperX Memory

  • HyperX® FURY
    HyperX® FURY
    HyperX FURY 4GB Model: HX318C10F/4 HyperX HX318C10F/4 is a 512M x 64-bit (4GB) DDR3-1866 CL10 SDRAM (Synchronous DRAM) 1Rx8 memory module, based on eight 512M x 8-bit DDR3 FBGA components. This module has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. FEATURES •JEDEC standard 1.5V (1.425V ~1.575V) Power Supply •VDDQ = 1.5V (1.425V ~ 1.575V) •933MHz fCK for 1866Mb/sec/pin •8 independent internal bank •Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 •Programmable Additive Latency: 0, CL - 2, or CL - 1 clock •8-bit pre-fetch •Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] •Bi-directional Differential Data Strobe •Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) •On Die Termination using ODT pin •Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C •Asynchronous Reset •Height 1.291” (32.80mm) w/heatsink, single sided component. SPECIFICATIONS CL (IDD): 10 cycles Row Cycle Time: 44.75ns(min.) Refresh to Active/Refresh Command Time: 260ns(min.) Row Active Time: 32.125ns(min.) Maximum Operating Power: TBD W" UL Rating: 94 V-0 DOWNLOAD DATASHEET HyperX FURY 4GB Model: HX318C10F/4 HyperX HX318C10F/4 is a 512M x 64-bit (4GB) ...
  • HyperX® FURY
    HyperX® FURY
    HyperX FURY 4GB HX318C10FB HyperX HX318C10FB/4 is a 512M x 64-bit (4GB) DDR3-1866 SDRAM (Synchronous DRAM) 1Rx8 memory module, based on eight 512M x 8-bit DDR3 FBGA components. This module has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. FEATURES •JEDEC standard 1.5V (1.425V ~1.575V) Power Supply •VDDQ = 1.5V (1.425V ~ 1.575V) •933MHz fCK for 1866Mb/sec/pin •8 independent internal bank •Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 •Programmable Additive Latency: 0, CL - 2, or CL - 1 clock •8-bit pre-fetch •Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] •Bi-directional Differential Data Strobe •Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) •On Die Termination using ODT pin •Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C •Asynchronous Reset •Height 1.291” (32.80mm) w/heatsink, single sided component SPECIFICATIONS CL (IDD): 10 cycles Row Cycle Time: 44.75ns(min.) Refresh to Active/Refresh Command Time: 260ns(min.) Row Active Time: 32.125ns(min.) Maximum Operating Power: TBD W" UL Rating: 94 V-0 DOWNLOAD DATASHEET HyperX FURY 4GB HX318C10FB HyperX HX318C10FB/4 is a 512M x 64-bit (4GB) DDR3-186...
  • HyperX® FURY
    HyperX® FURY
    HyperX® FURY 4GB Model: HX318C10FR HyperX HX318C10FR/4 is a 512M x 64-bit (4GB) DDR3-1866 CL10 SDRAM (Synchronous DRAM) 1Rx8 memory module, based on eight 512M x 8-bit DDR3 FBGA components. This module has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. FEATURES •JEDEC standard 1.5V (1.425V ~1.575V) Power Supply •VDDQ = 1.5V (1.425V ~ 1.575V) •933MHz fCK for 1866Mb/sec/pin •8 independent internal bank •Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 •Programmable Additive Latency: 0, CL - 2, or CL - 1 clock •8-bit pre-fetch •Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] •Bi-directional Differential Data Strobe •Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) •On Die Termination using ODT pin •Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C •Asynchronous Reset •Height 1.291” (32.80mm) w/heatsink, single sided component SPECIFICATIONS CL (IDD): 10 cycles Row Cycle Time: 44.75ns(min.) Refresh to Active/Refresh Command Time: 260ns(min.) Row Active Time: 32.125ns(min.) Maximum Operating Power: TBD W" UL Rating: 94 V-0 DOWNLOAD DATASHEET HyperX® FURY 4GB Model: HX318C10FR HyperX HX318C10FR/4 is a 512M x 64-bit (4GB)...
  • HyperX® FURY
    HyperX® FURY
    HyperX® FURY 8GB Model: HX318C10F HyperX HX318C10F/8 is a 1G x 64-bit (8GB) DDR3-1866 CL10 SDRAM (Synchronous DRAM) 2Rx8 memory module, based on sixteen 512M x 8-bit DDR3 FBGA components. This module has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. FEATURES •JEDEC standard 1.5V (1.425V ~1.575V) Power Supply •VDDQ = 1.5V (1.425V ~ 1.575V) •933MHz fCK for 1866Mb/sec/pin •8 independent internal bank •Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 •Programmable Additive Latency: 0, CL - 2, or CL - 1 clock •8-bit pre-fetch •Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] •Bi-directional Differential Data Strobe •Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) •On Die Termination using ODT pin •Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C •Asynchronous Reset •Height 1.291” (32.80mm) w/heatsink, single sided component SPECIFICATIONS CL (IDD): 10 cycles Row Cycle Time: 44.75ns(min.) Refresh to Active/Refresh Command Time: 260ns(min.) Row Active Time: 32.125ns(min.) Maximum Operating Power: TBD W" UL Rating: 94 V-0 DOWNLOAD DATASHEET HyperX® FURY 8GB Model: HX318C10F HyperX HX318C10F/8 is a 1G x 64-bit (8GB) DDR...
  • HyperX® FURY
    HyperX® FURY
    HyperX® FURY 8GB Model: HX318C10FB HyperX HX318C10FB/8 is a 1G x 64-bit (8GB) DDR3-1866 CL10 SDRAM (Synchronous DRAM) 2Rx8 memory module, based on sixteen 512M x 8-bit DDR3 FBGA components. This module has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. FEATURES •JEDEC standard 1.5V (1.425V ~1.575V) Power Supply •VDDQ = 1.5V (1.425V ~ 1.575V) •933MHz fCK for 1866Mb/sec/pin •8 independent internal bank •Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 •Programmable Additive Latency: 0, CL - 2, or CL - 1 clock •8-bit pre-fetch •Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] •Bi-directional Differential Data Strobe •Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) •On Die Termination using ODT pin •Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C •Asynchronous Reset •Height 1.291” (32.80mm) w/heatsink, single sided component SPECIFICATIONS CL (IDD): 10 cycles Row Cycle Time: 44.75ns(min.) Refresh to Active/Refresh Command Time: 260ns(min.) Row Active Time: 32.125ns(min.) Maximum Operating Power: TBD W" UL Rating: 94 V-0 DOWNLOAD DATASHEET HyperX® FURY 8GB Model: HX318C10FB HyperX HX318C10FB/8 is a 1G x 64-bit (8GB) D...
  • HyperX® FURY
    HyperX® FURY
    HyperX® FURY 8GB Model: HX318C10FR HyperX HX318C10FR/8 is a 1G x 64-bit (8GB) DDR3-1866 CL10 SDRAM (Synchronous DRAM) 2Rx8 memory module, based on sixteen 512M x 8-bit DDR3 FBGA components. This module has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. FEATURES •JEDEC standard 1.5V (1.425V ~1.575V) Power Supply •VDDQ = 1.5V (1.425V ~ 1.575V) •933MHz fCK for 1866Mb/sec/pin •8 independent internal bank •Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 •Programmable Additive Latency: 0, CL - 2, or CL - 1 clock •8-bit pre-fetch •Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] •Bi-directional Differential Data Strobe •Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) •On Die Termination using ODT pin •Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C •Asynchronous Reset •Height 1.291” (32.80mm) w/heatsink, single sided component SPECIFICATIONS CL (IDD): 10 cycles Row Cycle Time: 44.75ns(min.) Refresh to Active/Refresh Command Time: 260ns(min.) Row Active Time: 32.125ns(min.) Maximum Operating Power: TBD W" UL Rating: 94 V-0 DOWNLOAD DATASHEET HyperX® FURY 8GB Model: HX318C10FR HyperX HX318C10FR/8 is a 1G x 64-bit (8GB) D...
  • HyperX® FURY
    HyperX® FURY
    HyperX® FURY 4GB Model: HX421C14FB HyperX HX421C14FB/4 is a 512M x 64-bit (4GB) DDR4-2133 CL14 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2133 at a low latency timing of 14-14-14 at 1.2V. FEATURES •JEDEC standard 1.5V (1.425V ~1.575V) Power Supply •VDDQ = 1.5V (1.425V ~ 1.575V) •933MHz fCK for 1866Mb/sec/pin •8 independent internal bank •Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 •Programmable Additive Latency: 0, CL - 2, or CL - 1 clock •8-bit pre-fetch •Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] •Bi-directional Differential Data Strobe •Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) •On Die Termination using ODT pin •Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C •Asynchronous Reset •Height 1.291” (32.80mm) w/heatsink, single sided component SPECIFICATIONS CL (IDD): 10 cycles Row Cycle Time: 44.75ns(min.) Refresh to Active/Refresh Command Time: 260ns(min.) Row Active Time: 32.125ns(min.) Maximum Operating Power: TBD W" UL Rating: 94 V-0 DOWNLOAD DATASHEET HyperX® FURY 4GB Model: HX421C14FB HyperX HX421C14FB/4 is a 512M x 64-bit (4GB)...
  • HyperX® FURY
    HyperX® FURY
    HyperX® FURY 4GB Model: HX421C14FB HyperX HX421C14FB/8 is a 1G x 64-bit (8GB) DDR4-2133 CL14 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2133 at a low latency timing of 14-14-14 at 1.2V. FEATURES •JEDEC standard 1.5V (1.425V ~1.575V) Power Supply •VDDQ = 1.5V (1.425V ~ 1.575V) •933MHz fCK for 1866Mb/sec/pin •8 independent internal bank •Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 •Programmable Additive Latency: 0, CL - 2, or CL - 1 clock •8-bit pre-fetch •Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] •Bi-directional Differential Data Strobe •Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) •On Die Termination using ODT pin •Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C •Asynchronous Reset •Height 1.291” (32.80mm) w/heatsink, single sided component SPECIFICATIONS CL (IDD): 10 cycles Row Cycle Time: 44.75ns(min.) Refresh to Active/Refresh Command Time: 260ns(min.) Row Active Time: 32.125ns(min.) Maximum Operating Power: TBD W" UL Rating: 94 V-0 DOWNLOAD DATASHEET HyperX® FURY 4GB Model: HX421C14FB HyperX HX421C14FB/8 is a 1G x 64-bit (8GB) D...
  • HyperX® FURY
    HyperX® FURY
    HyperX® FURY 4GB Model: HX424C15FB HyperX HX424C15FB/4 is a 512M x 64-bit (4GB) DDR4-2400 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V. FEATURES •JEDEC standard 1.5V (1.425V ~1.575V) Power Supply •VDDQ = 1.5V (1.425V ~ 1.575V) •933MHz fCK for 1866Mb/sec/pin •8 independent internal bank •Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 •Programmable Additive Latency: 0, CL - 2, or CL - 1 clock •8-bit pre-fetch •Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] •Bi-directional Differential Data Strobe •Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) •On Die Termination using ODT pin •Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C •Asynchronous Reset •Height 1.291” (32.80mm) w/heatsink, single sided component SPECIFICATIONS CL (IDD): 10 cycles Row Cycle Time: 44.75ns(min.) Refresh to Active/Refresh Command Time: 260ns(min.) Row Active Time: 32.125ns(min.) Maximum Operating Power: TBD W" UL Rating: 94 V-0 DOWNLOAD DATASHEET HyperX® FURY 4GB Model: HX424C15FB HyperX HX424C15FB/4 is a 512M x 64-bit (4GB)...
  • HyperX® FURY
    HyperX® FURY
    HyperX® FURY 8GB Model: HX424C15FB HyperX HX424C15FB/8 is a 1G x 64-bit (8GB) DDR4-2400 CL15 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V. FEATURES •JEDEC standard 1.5V (1.425V ~1.575V) Power Supply •VDDQ = 1.5V (1.425V ~ 1.575V) •933MHz fCK for 1866Mb/sec/pin •8 independent internal bank •Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 •Programmable Additive Latency: 0, CL - 2, or CL - 1 clock •8-bit pre-fetch •Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] •Bi-directional Differential Data Strobe •Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) •On Die Termination using ODT pin •Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C •Asynchronous Reset •Height 1.291” (32.80mm) w/heatsink, single sided component SPECIFICATIONS CL (IDD): 10 cycles Row Cycle Time: 44.75ns(min.) Refresh to Active/Refresh Command Time: 260ns(min.) Row Active Time: 32.125ns(min.) Maximum Operating Power: TBD W" UL Rating: 94 V-0 DOWNLOAD DATASHEET HyperX® FURY 8GB Model: HX424C15FB HyperX HX424C15FB/8 is a 1G x 64-bit (8GB) D...