N a n o t e c

Bringing you the Innovation. Professional ICT and Security Distributor
Cart (empty)
Your cart is empty
MENU
  • All ProductsNew!
  • Deals & ServicesOffered!
  • Brands
  • About Us

Ubiquiti

  • airMAX® PowerBeam™M5 Bridge
    airMAX® PowerBeam™M5 Bridge
    airMAX® PowerBeam™M5 Bridge Model: PBE-M5-400 The PowerBeam M5-400 directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam M5-400 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. SPECIFICATION: Manufacturer / Product: Ubiquiti Networks / PowerBeam M5-400 Processor Specs: Atheros MIPS 74KC, 560 MHz Memory Information: 64MB SDRAM, 8MB Flash Operating System: AirOS Networking Interface: 1 x 10/100 BASE-TX (Cat. 5, RJ-45) Frequency Band: Worldwide: 5170 - 5875 MHz USA: 5725 - 5850 MHz Supported Standards: IEEE 802.11a: 54MBit IEEE 802.11n: 300MBit TX Power: max. 26dBm RX Sensitivity: min. -94dBm TCP/IP Throughput: 150Mbps+ Range: up to 25km+ Antenna: 25dBi Dual-Linear Backfire Antenna max. Power Consumption: 8 Watt Power Method: Passive Power over Ethernet PoE Injector is included! Power Input: 12V - 24V (12 Watt) ESD/EMP Protection: 24KV radio frequency and ethernet electrostatic discharge (ESD) protection. Dimensions: 42 x 42 x 27.5 mm Weight: 1.753 kg max. Wind Load 342.5 N @ 200 km/h Operating Temperature: -40°C to +70°C Operating Humidity: 5 to 95% non condensing Shock and Vibration:: IEC 68-2-6, IEC 68-2-14 DOWNLOAD DATASHEET airMAX® PowerBeam™M5 Bridge Model: PBE-M5-400 The PowerBeam M5-400 directs RF...
  • airMAX® PowerBeam™M5 Bridge
    airMAX® PowerBeam™M5 Bridge
    airMAX® PowerBeam™M5 Bridge Model: PBE-M5-620 The PowerBeam directs RF energy in a tighter beam width. With the focus in one direction, the PowerBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. SPECIFICATION: • Processor: Atheros MIPS 74KC, 560MHz • Memory: 64MB DDR2, 8MB Flash • (1) 10/100/1000 Ethernet port • Wireless approvals: FCC, IC, CE • RoHS compliance: Yes • Power supply: 24V, 0.5A Gigabit PoE • Power method: Passive PoE (Pairs 4, 5+; 7, 8 Return) • Max. power consumption: 8.5W • Operating frequency: 5170-5875MHz (International) / 5725-5850Mhz (USA) • Gain: 29dBi • Max. VSWR: 2:1 • Built-In mechanical down tilt: +15° to -15° • Channel sizes: 5/8/10/20/30/40 MHz • Polarization: Dual linear • Mounting: Pole-mount (kit included) • ESD / EMP protection: Air: ±24kV, Contact:± 24kV • Operating temperature: -40 to 70° C • Operating humidity: 5 to 95% Non-condensing DOWNLOAD DATASHEET airMAX® PowerBeam™M5 Bridge Model: PBE-M5-620 The PowerBeam directs RF energy...
  • airMAX® PowerBeam™M5 Bridge
    airMAX® PowerBeam™M5 Bridge
    airMAX® PowerBeam™M5 Bridge Model: PBE-M5-300-ISO The Ubiquiti Networks PowerBeam ISO is an airMAX Bridge that is ideal for deployments requiring maximum performance and RF isolation. The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. This combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. Ubiquiti has an InnerFeed technology that integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is extremely versatile and cost‑effective to deploy. SPECIFICATION: • Processor: Atheros MIPS 74Kc, 560MHz • Memory: 64MB DDR2, 8MB Flash • Networking Interface: 1 x 10/100 Ethernet Port • Power Supply: 24V, 0.5A PoE • Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) • Supported Voltage Range: 20-26VDC • Max. Power Consumption: 6W • Gain: 22 dBi • Operating Frequency: Worldwide: 5170 - 5875MHz; USA: 5725 - 5850MHz • Wind Loading: 210 N @ 200 km/h (47 lbf @ 125 mph) • Wind Survivability: 200 km/h (125 mph) • LEDs (1) Power, (1) LAN, (4) WLAN • Channel Sizes: 5/8/10/20/30/40 MHz • Polarization: Dual Linear • Enclosure: Outdoor UV Stabilized Plastic • Operating Temperature -40 to 158deg F (-40 to 70deg C) • Operating Humidity: 5 to 95% Non-Condensing DOWNLOAD DATASHEET airMAX® PowerBeam™M5 Bridge Model: PBE-M5-300-ISO The Ubiquiti Networks Power...
  • airMAX® PowerBeam™M5 Bridge
    airMAX® PowerBeam™M5 Bridge
    airMAX® PowerBeam™M5 Bridge Model: PBE-M5-400-ISO The Ubiquiti Networks PowerBeam ISO is an airMAX Bridge that is ideal for deployments requiring maximum performance and RF isolation. The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. This combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. Ubiquiti has an InnerFeed technology that integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is extremely versatile and cost‑effective to deploy. SPECIFICATION: • Processor: Atheros MIPS 74Kc, 560MHz • Memory: 64MB DDR2, 8MB Flash • Networking Interface: 1 x 10/100/1000 Ethernet Port • Power Supply: 24V, 0.5A PoE • Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) • Supported Voltage Range: 18-26VDC • Max. Power Consumption: 8W • Gain: 25dBi • Operating Frequency: Worldwide: 5170 - 5875MHz; USA: 5725 - 5850MHz • Wind Loading: 210 N @ 200 km/h (47 lbf @ 125 mph) • Wind Survivability: 200 km/h (125 mph) • LEDs (1) Power, (1) LAN, (4) WLAN • Channel Sizes: 5/8/10/20/30/40 MHz • Polarization: Dual Linear • Enclosure: Outdoor UV Stabilized Plastic • Operating Temperature -40 to 158deg F (-40 to 70deg C) • Operating Humidity: 5 to 95% Non-Condensing DOWNLOAD DATASHEET airMAX® PowerBeam™M5 Bridge Model: PBE-M5-400-ISO The Ubiquiti Networks Power...
  • airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge Model: PBE-5AC-300 The PowerBeam ac directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam ac blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. SPECIFICATION: • Processor: Atheros MIPS 74Kc, 560MHz • Memory: 64MB DDR2, 16MB flash • Networking interface: (1) 10/100/1000 Ethernet port • Channel size: 10/20/30/40/50/60/80MHz (PtP) / 10/20/30/40MHz (PtMP) • Protocol: 802.11ac • Polarization: Dual linear • Gain: 22dBi • ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV • Operating Temperature -40 to 70° C (-40 to 158° F) • Operating Humidity 5 to 95% Non-Condensing • Supported Voltage Range: 20-26V DC • Power Supply 24V, 0.5A Gigabit PoE • Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) • Max. Power Consumption 5.5W DOWNLOAD DATASHEET airMAX® PowerBeam™ac Bridge Model: PBE-5AC-300 The PowerBeam ac directs RF en...
  • airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge Model: PBE-5AC-400 Ubiquiti airMAX ac devices feature a multi-radio architecture to power a revolutionary RF analytics engine. An independent processor on the Printed Circuit Board Assembly powers a second, dedicated radio, which persistently analyzes the full 5 GHz spectrum and every received symbol to provide you with the most advanced RF analytics in the industry. Using Ubiquiti airMAX AC technology, the PBE-5AC-400 supports up to 450+ Mbps real TCP/IP throughput up to triple the throughput of standard airMAX products! airMAX ac supports high data rates, which require dense modulation: 256QAM – a significant increase from 64QAM, which is used in airMAX. SPECIFICATION: • Processor: Atheros MIPS 74Kc 560MHz • Memory: 64MB DDR2, 16MB Flash • Channel Size: PtP Mode 10/20/30/40/50/60/80MHz PtMP Mode 10/20/30/40 Mhz • Protocol: 802.11ac • Polarization: Dual Linear • Gain: 25dBi • Operating frequency: International:5150-5875Mhz USA: 5725-5850Mhz • Power Supply: 24V, 0.5A Gigabit PoE • Max. power consumption: 8.5W • Wind survivability: 200km/h (125mph) • ESD/EMP protection: Air: ± 24 kV, Contact: ± 24 kV • Operating temperature: -40 to 70° C (-40 to 158° F) • Operating humidity: 5 to 95% Non-Condensing • Mechanical tIlt: 20° uptilt and 10° downtilt DOWNLOAD DATASHEET airMAX® PowerBeam™ac Bridge Model: PBE-5AC-400 Ubiquiti airMAX ac devices fea...
  • airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge Model: PBE-5AC-500 The Ubiquiti airMAX PowerBeam AC PBE-5AC-500 is the latest addition to the PowerBeam Range, the new AC model supports the latest 802.11ac technology and combines it with Ubiquiti's highest gain PowerBeam dish supporting up to 27dBi gain. This new PowerBeam AC can support up to 450Mbps over a link thanks to the 802.11ac support, this makes it ideal for use in high throughput back haul links in WISP networks where an airFiber may not be appropriate. The PowerBeam AC is the only PowerBeam model to be provided with a Radome as standard, this protects the feedhorn and the dish from the elements. SPECIFICATION: TX Power regulation: yes Comformity: FCC, IC, CE Default IP: 192.168.1.20 Default name: ubnt Default password: ubnt DHCP: yes Dimension: 525 x 525 x 315 mm (including radome) Encryption: WPA2 AES Frequence: 5.150 - 5.875 GHz Gain: 27 dBi Chipset: Atheros Interface : LAN, WiFI IPv6 support: Transparent (Bridge mode) LAN port: 1x RJ45 10/100/1000 Mbps Max. output power: 49 dBm Modulation: OFDM NAND: 8 MB Operation mode : AP, Client Operational temperature: -40 ~ 70 C OS: AirOS V Polarization: H/V Power supply: 24 V, 0.5 A Procesor: MIPS 74Kc, 720 MHz RAM: 128 MB Sensitivity: -96 dBm Standards: 802.11ac Transmission speed: 450 Mbps Weight: 3.15 kg (Including Radome)   DOWNLOAD DATASHEET airMAX® PowerBeam™ac Bridge Model: PBE-5AC-500 The Ubiquiti airMAX PowerBeam ...
  • airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge Model: PBE-5AC-620 Ubiquiti Point to Point link using the lastest ac airMAX technology, the PBE-5AC-620 supports up to 450+ Mbps real TCP/IP throughput. It launches with PtP functionality, and a client mode feature will be added with a future firmware upgrade. 2 units are required for a link.  SPECIFICATION: • Processor: Atheros MIPS 74Kc 720MHz • Memory: 128MB DDR2, 8MB Flash • Channel Size: PtP Mode 10/20/30/40/50/60/80MHz PtMP Mode 10/20/30/40 Mhz • Protocol: 802.11AC • Polarization: Dual Linear • Gain: 29dBi • Operating frequency: International: 5150-5875Mhz USA: 5725-5850Mhz • Power Supply: 24V, 0.5A Gigabit PoE • Max. power consumption: 8.5W • Wind survivability: 200km/h (125mph) • Polarization: Dual linear • ESD/EMP protection: Air: ± 24 kV, Contact: ± 24 kV • Operating temperature: -40 to 70° C (-40 to 158° F) • Operating humidity: 5 to 95% Non-Condensing   DOWNLOAD DATASHEET airMAX® PowerBeam™ac Bridge Model: PBE-5AC-620 Ubiquiti Point to Point link u...
  • airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge Model: PBE-5AC-300-ISO Incorporating advanced engineering with proprietary airMAX ac technology, the PowerBeam®ac ISO is ideal for deployments requiring maximum performance and RF isolation. airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. SPECIFICATION: Processor Specs Atheros MIPS 74Kc, 560 MHz Memory 64 MB DDR2, 16 MB Flash Networking Interface (1) 10/100/1000 Ethernet Port Wireless Approvals FCC, IC, CE RoHS Compliance Yes Dimensions 364 x 364 x 276 mm (14.33 x 14.33 x 10.87") Weight 2.55 kg (5.62 lb) Power Supply 24V, 0.5A Gigabit PoE Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Supported voltage Range 20-26VDC Max. Power Consumption 5.5W Gain 22 dBi Operating Frequency Worldwide USA 5170 - 5875 MHz 5725 - 5850 MHz Wind Loading 210 N @ 200 km/h (47 lbf @ 125 mph) Wind Survivability 200 km/h (125 mph) LEDs (1) Power, (1) LAN, (4) WLAN Signal Strength LEDs Software-Adjustable to Correspond to Custom RSSI Levels Channel Sizes PtP Mode PtMP Mode 10/20/30/40/50/60/80 MHz 10/20/30/40 MHz Polarization Dual Linear Enclosure Outdoor UV Stabilized Plastic Mounting Pole-Mount Kit Included ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV Operating Temperature -40 to 70° C (-40 to 158° F) Operating Humidity 5 to 95% Noncondensing Salt Fog Test IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 Vibration Test IEC 68-2-6 Temperature Shock test IEC 68-2-14 UV Test IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4 Wind-Driven Rain Test ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5   DOWNLOAD DATASHEET airMAX® PowerBeam™ac Bridge Model: PBE-5AC-300-ISO Incorporating advanced eng...
  • airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge Model: PBE-5AC-400-ISO The Ubiquiti Networks PowerBeam ac ISO is an airMAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation. The PowerBeam ac ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. This combination of focused beam directivity and RF isolation, the PowerBeam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. Ubiquiti has an InnerFeed technology that integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ac ISO is extremely versatile and cost‑effective to deploy. SPECIFICATION: • Processor: Atheros MIPS 74Kc, 560MHz • Memory: 64MB DDR2, 16MB Flash • Networking Interface: 1 x 10/100/1000 Ethernet Port • Power Supply: 24V, 0.5A PoE • Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) • Supported Voltage Range: 20-26VDC • Max. Power Consumption: 8.5W • Gain: 25dBi • Operating Frequency: Worldwide: 5170 - 5875MHz; USA: 5725 - 5850MHz • Wind Loading: 210 N @ 200 km/h (47 lbf @ 125 mph) • Wind Survivability: 200 km/h (125 mph) • LEDs (1) Power, (1) LAN, (4) WLAN • Channel Sizes: PtP Mode: 10/20/30/40/50/60/80MHz; PtMP Mode: 10/20/30/40MHz • Polarization: Dual Linear • Enclosure: Outdoor UV Stabilized Plastic • Operating Temperature -40 to 158deg F (-40 to 70deg C) • Operating Humidity: 5 to 95% Non-Condensing DOWNLOAD DATASHEET airMAX® PowerBeam™ac Bridge Model: PBE-5AC-400-ISO The Ubiquiti Networks Powe...
  • airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge
    airMAX® PowerBeam™ac Bridge Model: PBE-5AC-500-ISO The Ubiquiti Networks PowerBeam ac ISO is an airMAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation. The PowerBeam ac ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. This combination of focused beam directivity and RF isolation, the PowerBeam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. Ubiquiti has an InnerFeed technology that integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ac ISO is extremely versatile and cost‑effective to deploy. SPECIFICATION: Processor Atheros MIPS 74 Kc, 720 MHz Memory 128 MB DDR2, 8 MB flash Networking Interface 1 x 10/100/1000 Ethernet port Wireless Approvals FCC, IC, CE RoHS Compliance Yes Power Supply 24 V, 0.5 A Gigabit PoE Power Method Passive PoE (Pairs 4, 5+, 7, 8 Return) Voltage Range 20 to 26 VDC Max Power Consumption 8.5 W Gain 27 dBi Operating Frequency 5725 - 5850 MHz Wind Loading 419.6 N @ 200 km/h (94.33 lbf @ 125 mph) Wind Survivability 200 km/h (125 mph) LEDs 1 x Power 1 x LAN 4 x WLAN Signal Strength LEDs Software-adjustable to correspond to custom RSSI levels Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz PtMP Mode: 10/20/30/40 MHz Polarization Dual linear Enclosure Outdoor UV stabilized plastic Mounting Pole-mount kit included ESD/EMP Protection Air: ± 24 kV Contact: ± 24 kV Operating Temperature -40 to 158°F / -40 to 70°C Operating Humidity 5 to 95% non-condensing Salt Fog Test IEC 68-2-11 (ASTM B117),... airMAX® PowerBeam™ac Bridge Model: PBE-5AC-500-ISO The Ubiquiti Networks Powe...
  • airMAX© NanoBridge©M2 Bridge
    airMAX© NanoBridge©M2 Bridge
    airMAX© NanoBridge©M2 Bridge Model: NB-2G18 With the NanoBridge®, Ubiquiti Networks™ pioneered the all-in-one design for an airMAX® product functioning as a CPE (Customer Premises Equipment). The NanoBridge combines Ubiquiti's InnerFeed™ and airMAX technologies to create a simple, yet powerful wireless unit capable of up to 100+ Mbps real outdoor throughput and up to 30+ km range. SPECIFICATION: Model Number NB-2G18 Processor Specs Atheros MIPS 24KC 400 MHz Memory 32 MB SDRAM 8 MB Flash Networking Interface 1 x 10/100 Ethernet Port REGULATORY/COMPLIANCE INFORMATION Wireless Approvals FCC IC CE RoHS Compliance Yes PHYSICAL/ELECTRICAL/ENVIRONMENTAL Dimensions (mm) 400 diameter Weight Dish and Mount Included) 2.346 kg Power Supply 24V 0.5A PoE Power Method Passive Poe (Pairs 4, 5+; 7, 8 Return) Max Power Consumption 5.5 W Gain 18 dBi LEDs (1) Power (1) LAN (4) WLAN Wind Loading 77 Ibf @ 125 mph Wind Survivability 125 mph LEDs (1) Power (1) LAN (4) WLAN Signal Strength LEDs Software-Adjustable to Correspond to Custom RSSI Levels Enclosure Outdoor UV Stabilized Plastic Mounting Pole-Mounting Kit Included Operating Temperature -30 to 75° C Operating Humidity 5 to 95% Non-Condensing Shock & Vibration ETS1300-019-1.4 OPERATING FREQUENCY SUMMARY (MHz) Worldwide USA 2402 - 2462 ANTENNA INFORMATION Gain 18 dBi Max VSWR 1.6:1   DOWNLOAD DATASHEET airMAX© NanoBridge©M2 Bridge Model: NB-2G18 With the NanoBridge®, Ubiquiti Ne...
  • airMAX© NanoBridge©M5 Bridge
    airMAX© NanoBridge©M5 Bridge
    airMAX© NanoBridge©M5 Bridge Model: NB-5G22 With the NB-5G22-US NanoBridge M High Performance airMAX Bridge from Ubiquiti Networks features an all-in-one design for an airMAX product functioning as a CPE (Customer Premises Equipment). The NanoBridge combines Ubiquiti's InnerFeed and airMAX technologies to create a simple, yet powerful wireless unit capable of up to 150+ Mbps real outdoor throughput and up to 18+ mi (30+ km) range. SPECIFICATION: Processor Atheros MIPS 24KC, 400 MHz Memory 32 MB SDRAM, 8 MB Flash Networking Interface 1 x 10/100 Ethernet port Regulatory Compliance Wireless Approvals FCC, IC, CE RoHS Compliance Yes Physical/Electrical/Environmental Power Supply 24 V, 0.5 A PoE Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Max Power Consumption 5.5 W Gain 22 dBi LEDs 1 x Power, 1 LAN, 4 WLAN Wind Loading 45 lbf @ 125 mph Wind Survivability 125 mph Signal Strength LEDs Software-adjustable to correspond to custom RSSI levels Enclosure Outdoor UV stabilized plastic Mounting Pole-mounted kit Environment Operating Temperature: 32 to 158°F / -30 to 70°C Operating Humidity: 5 to 95% (non-condensing) Shock and Vibration ETSI300-019-1.4 Operating Frequency Frequency Worldwide: 5170 - 5875 MHz USA: 5725 - 5850 MHz Output Power Output Power: 23 dBm 5 GHz TX Power Specifications 11n/airMAX Data Rate / Avg. TX / Tolerance MCS0 23 dBm ± 2 dB MCS1 23 dBm ± 2 dB MCS2 23 dBm ± 2 dB MCS3 23 dBm ± 2 dB MCS4 22 dBm ± 2 dB MCS5 20 dBm ± 2 dB MCS6 19 dBm ± 2 dB MCS7 18 dBm ± 2 dB MCS8 23 dBm ± 2 dB MCS9 23 dBm ± 2 dB MCS10 23 dBm ± 2 dB MCS11 23 dBm ± 2 dB MCS12 22 dBm ± 2 dB MCS13 20 dBm ± 2 dB MCS14 19 dBm ± 2 dB MCS15 18 dBm ± 2 dB 5 GHz RX Power Specifications 11n/airMAX Data Rate / Sensitivity / Tolerance MCS0 -96 dBm ± 2 dB MCS1 -95 dBm ± 2 dB MCS2 -92 dBm ± 2 dB MCS3 -90 dBm ± 2 dB MCS4 -86 dBm ± 2 dB... airMAX© NanoBridge©M5 Bridge Model: NB-5G22 With the NB-5G22-US NanoBridge M H...
  • airMAX© NanoBridge©M5 Bridge
    airMAX© NanoBridge©M5 Bridge
    airMAX© NanoBridge©M5 Bridge Model: NB-5G25 With the NB-5G25 NanoBridge M High Performance airMAX Bridge from Ubiquiti Networks features an all-in-one design for an airMAX product functioning as a CPE (Customer Premises Equipment). The NanoBridge combines Ubiquiti's InnerFeed and airMAX technologies to create a simple, yet powerful wireless unit capable of up to 150+ Mbps real outdoor throughput and up to 18+ mi (30+ km) range. SPECIFICATION: System Information Processor Specs Atheros MIPS 24KC, 400MHz Memory Information 32MB SDRAM, 8MB Flash Networking Interface 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Regulatory / Compliance Information Wireless Approvals FCC Part 15.247, IC RS210, CE RoHS Compliance Yes Physical / Electrical / Environmental Enclosure Characteristics Outdoor UV Stabilised Plastic Mounting Kit Pole Mounting Kit included Power Supply 24V, 1A POE Supply included Power Method Passive Power over Ethernet (pairs 4, 5+; 7, 8 return) Operating Temperature -30C to 75C Operating Humidity 5 to 95% Condensing Shock and Vibration ETSI300-019-1.4 Dimensions 400 mm diameter Weight 1565g Max Power Consumption 5.5 Watts Antenna Gain 25 dBi (M5-25) DOWNLOAD DATASHEET airMAX© NanoBridge©M5 Bridge Model: NB-5G25 With the NB-5G25 NanoBridge M High...
  • airMAX© NanoStation©locoM2 Bridge
    airMAX© NanoStation©locoM2 Bridge
    airMAX© NanoStation©M2 Bridge Model: loco M2 The original NanoStation set the bar for the world's first low-cost and efficiently designed outdoor broadband CPE. The new NanoStation M and NanoStation Loco M take the same concept to the future with new redesigned sleek and elegant form-factors. SPECIFICATION: MIPS 24KC, 400MHz 32MB SDRAM, 8MB Flash 1 x 10/100 Base-TX (Cat.5, RJ-45) Ethernet Interface FCC Part 15.247, IC RS210, CE Integrated 2x2 MIMO Antenna: Frequency Range: 2.4 GHz Gain: 8.5 dBi Polarization: Dual Linear Cross-Polarization Isolation: 20 dB minimum H-pol Beamwidth: 60° V-pol Beamwidth: 60° Elevation Beamwidth: 60° Maximum Power Consumption: 5.5 Watts Dimensions: 16.3 cm x 8 cm x 3 cm Weight: 0.18 kg Enclosure: Outdoor UV Stabilized Plastic Pole Mounting Kit included Power Supply: 24V, 0.5A surge portection integrated POE adapter included, US Style plug Power Method: Passive PoE (pairs 4,5+; 7.8 return) Operating Temp: -30°C to +80°C Shock and Vibration: ETSI300-019-1.4 RoHS Compliant: Yes   DOWNLOAD DATASHEET airMAX© NanoStation©M2 Bridge Model: loco M2 The original NanoStation set the ...
  • airMAX© NanoStation©locoM5 Bridge
    airMAX© NanoStation©locoM5 Bridge
    airMAX© NanoStation©locoM5 Bridge Model: loco M5 The Ubiquiti NanoStation M5 Loco is miniature copy of the very popular NanoStation M5 with unbelievable price with speeds up to 150 Mbps! NanoStation M5 Loco is a powerful entire outdoor unit including 2 x 13 dBi antenna (MIMO) for the 5 GHz band. Unit allows for real communication speeds up to 150 Mbps. SPECIFICATION: Processor Specs: Atheros MIPS 24KC, 400MHz Memory Information: 32MB SDRAM, 8MB Flash Networking Interface: 1 * 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface Compliance: FCC Part 15.247, CE, IC RS210, RoHS  TX Power: max. 23dBm, +/-2dB at 11a/11n RX Sensitivity: min. -83dBm +/-2dB at 11a, min. -96dBm +/-2dB at 11n Gain: 13dBi Polarization: Dual Linear Beamwidth: H 45° / V 45° TCP/IP Throughput: up to 150MBit/Sec. Max Power Consumption: Max. 5,5 Watts Power Supply: 24V, 0.5A surge protection integrated PoE adapter included Power Method: Passive Power over Ethernet (Paare 4,5+; 7,8 return) Operating Temperature: -30°C to +80°C   DOWNLOAD DATASHEET airMAX© NanoStation©locoM5 Bridge Model: loco M5 The Ubiquiti NanoStation M5 L...